Electrician Mitchelton

Nov 7

Electrical Safety Tips for the Workplace

Nowadays electricity is the power source for every workplace and office across the globe. From machines to computers that use electricity, all electrical devices can be risky if it is used or maintained incorrectly, which can result in burn and shock injuries. While most employees do not need specialized training in electrical safety and following electrical safety-related work procedures is essential to keep you and your colleagues safe. If you work with electricity but are not trained to handle electrical components specifically, here are some guidelines for electrical safety in the workplace to assist both you and electrician Mitchelton protect yourself from electrical hazards:

1. Avoid contact with live electric current.

Beware of electrical dangers is the most effective way to stay safe. The currents in the electrical circuit that are greater than 50 volts should not be interacted with or manipulated by non-qualified personnel. If you work in an area prone to electrical hazards or are equipped with equipment that operates at 50 volts or higher Keep your distance. Before beginning your work, make sure the panel doors are shut and there are no wires exposed around your workspace.

2. Use Lockout/Tagout in order to disable equipment.

Before working near or around exposed, live electrical parts that are electrically active should be removed from the circuit. To prevent electrical energy from being emitted, lock and label the affected parts or systems according to your company's Lockout/Tagout policy.

Lockout/tagout shields employees from electrical hazards when they are performing maintenance and servicing tasks.

3. Make sure you are using electrical equipment in a safe and secure manner.

It is possible to ensure safety while working by employing all electrical equipment in a safe manner.

Electrical wires should be handled carefully by employees.

Plug head, rather than pulling on the cord to disconnect cords.
Do not overstretch electrical wires or press them.
Staples should not be used to fix cords.
Electrical equipment shouldn't be suspended from cords.

Additionally, all cords and plugs used in the workplace must be examined visually for any external flaws prior to use. If you come across an electrical cord or plug that is damaged, you should not use it.

4. Be sure to protect against electrical hazards with proper Physical Barriers

Employers should be protected against electric hazards using physical barriers. Cabinet doors for electrical panels should permanently be closed, and there shouldn't be holes in the panels through which employees could come into contact with wires.

If cabinets cannot be closed or an electric hazard is not completely sealed, barriers, shields or other insulating material should be used.

To prevent anyone from getting into the areas where professional electricians are performing maintenance on an electric panel, physical barriers must be installed. Signs must be placed to warn employees about the danger, and any obstructions around the panel should be removed.

5. Cleaning tools and equipment that conduct electricity are not recommended for use.

When working in an area that has potential electrical dangers, think that the electrical components are alive. Avoid using conductive tools within this zone.

If you're cleaning the area take note that certain cleaning products can also be conductors, requiring extra care. Metalized cloth and steel wool, as well as solvents and water-based cleaning products, are electrical conductors. Cleaning products that are electrically conductive, as well as an electrically conductive instrument, should be kept away from live electrical parts and equipment.

6. Watch out for electric lines when working above the ground.

Be aware of electrical lines while doing any maintenance or work in high places. Many businesses may have active electrical equipment or pieces that are above floor level. These can only be accessed via ladders or high platforms. For the work mentioned above employ a portable ladder with side rails that are not conducive and keep at least 10 feet from any exposed electrical wires.

MRF Electrical pty ltd
Chermside West Brisbane QLD 4032
07 3184 4189
https://www.mrfelectricalptyltd.com/
https://www.google.com/maps?cid=10566730406564353307